How does the color steel tile machine work?

2019-07-25

The workbench of the color steel tile press has six processes, that is, the turning of the workbench (ie, the hexagonal runner). In addition to the first-level mechanical indexing and positioning, a set of precise positioning mechanism is also provided to ensure that each stamping process is completed. Accurate positioning of the table mold, the sliding table for mounting the upper mold is the box structure, the slide rail and the upper rail of the fuselage, the contact length is large, each stamping of the upper mold, the second stamping of the mud blank is the upper mold After the primary blank is in place, the upper die rises by 10 mm. Cold-formed steel is the main material for making lightweight steel structures, and is formed by cold bending of steel plates or steel strips.
The wall thickness of the C-shaped steel machine can be made very thin, and the production process is greatly simplified and the production efficiency is improved. It can produce cold-formed color steel equipment of various profiles and different materials with uniform wall thickness but complicated cross-section shape which are difficult to produce by general hot rolling method. After the mud blank is fully exhausted, the upper mold presses the tile blank in place to return to the high position, so that the mold has a long service life and the quality of the pressed product is good.
The color steel tile press will be equipped with a set of lubrication system. When the machine is running, it will automatically lubricate all the bearing bearings and the moving guides of the transmission gear mechanism.

Previous: Common fault analysis of roll formig machine press Next: Installation method of color steel tile pressing machine for color steel tile machine

Ms. Wendy

Email:

Send Inquiry

Tel:86-0317-7667606

Fax:0086-0317-7667606

Mobile Phone:+8615128799105

Email:

Address:Baozi Village,Nanxiakou Town,Dongguang County, Cangzhou, Hebei